BELGACOM Forum 500 Specifications download pdf (Page 52)

Configuration under Windows50

Configuration

Connection via the S

Port

First-time configuration of the Forum 500 is also possible by way

of an internal S

port. To do this, remote configuration must first

have been enabled by a connected terminal (see the section called

Remote Configuration starting on page 56).

1. Use the ISDN cable to connect a PC, fitted with an ISDN card,

to the internal S

port. On delivery, the S

ports of the

Forum 500 are assigned as follows:

– Forum 512: S

3 and S

– Forum 514: S

3 to S

– Forum 516: S

3 to S

2. Set up an RAS connection to the Forum 500 through the call

number “398504”. Log on as “Administrator”.

Testing the Setup

Subsequent to establishment, test the TCP/IP connection between

the Forum 500 and the PC.

1. Select the item “Run” in the Start menu. Enter the command

“ping host.domain” or

“ping 192.168.99.254” in the “Open” box.

2. Confirm this with “OK”.

Tip: To find the IP address of the Web console, enter

*182

on a connected system telephone. *183 will also show you

the network mask.

You can test the correct IP configuration under Windows 95 and

Windows 98. Select the item “Run” in the Start menu. Enter the

command “winipcfg” in the “Open” box. Confirm this with “OK”.

Select the network adapter used for connection to the Forum 500.

The IP addresses assigned by the Forum 500 on establishment of

the connection will be displayed.

Under Windows NT4, 2000 and XP you can check the IP configura-

tion by entering the commands “ipconfig -all” or “route print” in

the command prompt. The command “arp -a” produces a list of

assigned IP addresses for LAN links.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 143 144

Comments to this Manuals

No comments

BELGACOM Forum 500 Specifications Page 52

Comments to this Manuals

Related products and manuals for Telephones BELGACOM Forum 500